How to Install VPN Server and VPN Client?
To configure VPN server and VPN client, first confirm that
both ends (client computer and server computer) are
connected to Internet.
First click on Start button
then Control Panel > Administrative Tools,
here open the option Routing and Remote Access.
Browse the server name and then
click the option Configure and Enable Routing and
Remote Access from the Action menu, and then click
the Next button. Then you will find the Virtual
Private Network option in the Common
Configurations dialog box. Here select the option
Virtual Private Network and go for Next.
Here select the option Yes, all
of the available protocols are on this list then
click Next, In next step select the Internet
connection option to connect internet.
In IP Address Assignment
dialog box, select Automatically if you want to
use DHCP server for IP address, otherwise you can your
static IP address here if you have.
Here you will get a dialog box with
name Managing Multiple Remote Access Server,
check the option No, I don't want to set up this
server to use Radius now and Finish it.
On the Client computer first
connect Internet connection to make VPN setup.
Click Start Button and
sitting then go to option Network and Dial-up
Here click on Make New
Connection, select the option here Connection To
a Private Network Through the Internet and Next.
Select first option
Automatically Dial this Initial Connection, if you
are using dial-up connection, otherwise select Do not
dial the Initial Connection, if you are using cable
In next step type the IP address of the computer
to which you want to connect, then go Next and select
option For All Users or Only for Myself,
according to your requirement. Click Next and finish the